CCM Shin Guard Sizing Chart

Mastering the ice starts with the perfect fit. When it comes to hockey equipment, correctly sized shin guards are essential for maximizing performance, preventing injuries, and boosting your confidence on the rink. Ill-fitting pads can hinder your agility, limit your range of motion, and leave you vulnerable to painful impacts. Guard those precious shins with confidence and comfort, thanks to the perfect CCM hockey shin guard size!

Navigating the world of protective gear can be tricky, but finding the right fit for shin guards doesn't have to be a slap shot in the dark. This comprehensive guide will equip you with all the knowledge and resources you need to choose the ideal CCM shin guards for optimal protection and performance.


In this article, we will cover:


Why Equipment Sizing Matters

Choosing the right size for any sports equipment isn't just about aesthetics; it's crucial for maximizing performance, efficiency, and most importantly, safety. Ill-fitting shin guards can restrict movement, hinder agility, and leave vulnerable gaps in your defense. Imagine bulky pads slowing you down on the ice, or loose guards slipping out of place during a crucial block. Conversely, the perfect fit allows for seamless movement, maximum protection, and the confidence to take on any challenge head-on. In a fast-paced, physically demanding sport like hockey, proper sizing makes all the difference.


CCM Hockey Shin Guard Sizing Steps

Finding your ideal CCM hockey shin guard size is a breeze! Gear up for greatness with the perfect fit:

Step 1: Measure Your Shin

Stand in your hockey skates with your knees slightly bent. Measure the distance from the center of your kneecap to the top of your skate boot, where the tongue meets the shin guard. Round up to the nearest inch for optimal protection.

Step 2: Consult the CCM Hockey Shin Guard Size Chart

Match your shin measurement to the corresponding size based on the chart below. Remember, this is a starting point; fine-tuning might be needed!

Senior Sizing

SizeHeight (in.)Height (cm)
14in. / 36cm5'4" - 5'8"162 - 172
15in. / 38cm5'8" - 6'0"172 - 183
16in. / 41cm6'0" - 6'4"183 - 193

Junior Sizing

SizeHeight (in.)Height (cm)
11in. / 28cm4'4" - 4'8"130 - 140
12in. / 30cm4'8" - 5'0"140 - 150
13in. / 33cm5'0" - 5'4"150 - 160

Youth Sizing

SizeHeight (in.)Height (cm)
8in. / 20cm3'4" - 3'8"100 - 110
9in. / 23cm3'8" - 4'0"110 - 120
10in. / 25cm4'0" - 4'4"120 - 130

Shinguards are measured best while the player is sitting.

To fit properly:

  • Determine the level of play.
  • Shinguards are measured best while the player is sitting.
  • Measure from the center of the kneecap to the top of the skate boot.
  • Match the player’s shin size to the inches of shinguard.

Shinguards which are either too long or too short will result in the knee or instep being exposed and unprotected. Shinguards should be secured with shinguard straps or tape, never tight hockey stockings.

Step 3: Try on the Guards

Put on the shin guards with your hockey socks and pads underneath. Adjust the straps for a snug, secure fit without hindering your knee bend.

Step 4: Assess the Mobility

Bend your knees, squat, and skate in the shin guards. They should move freely with your body without binding or chafing.

Step 5: Check the Coverage

The guards should extend down to just above the top of your skate tongue, providing adequate protection without restricting ankle movement.

Step 6: Overlap Check

If you wear your shin guards over the skate tongue, ensure they overlap your skate tongue by roughly an inch for complete protection.

Bonus Tip: Consider your personal preferences! Do you prefer a snug, locked-in feel or a slightly looser fit for added airflow? Choose the size that makes you feel comfortable and confident on the ice.


Common Sizing Mistakes to Avoid

Steering clear of these pitfalls ensures optimal performance and protection:

Mistake 1: Ignoring Skating Style

Aggressive players might need a snugger fit than speed demons for optimal protection and control.

Mistake 2: Neglecting fit preference

Don't settle for discomfort! Choose a size that aligns with your preferred level of snugness for optimal performance and enjoyment.

Mistake 3: Ignoring skate tongue overlap

If you wear shin guards over the tongue, ensure proper overlap for complete protection.

Mistake 4: Neglecting knee bend

The guards shouldn't restrict your knee bend; adjust the straps for a comfortable, flexible fit.


FAQs on CCM Hockey Shin Guard Sizing

What if I'm between sizes?

If you fall between sizes, prioritize your skating style and fit preference. Opt for the larger size if you prefer a looser feel or play a more physical game, or the smaller size for a snugger fit and enhanced agility.

Can I use the same size shin guards as my shoe size?

It's crucial to follow the CCM sizing chart for shin guards, as hockey equipment sizing can vary from regular shoe sizes. The chart considers specific measurements to ensure a proper fit.

How often should I replace my shin guards?

Inspect your shin guards regularly for wear and tear. Replace them immediately if they show signs of damage or no longer provide adequate protection.

Do CCM shin guards offer adjustable sizing?

Some CCM models feature adjustable straps or buckles for a more customized fit. Check the specific product details before purchasing.